A complete Manual Traverse Unit consists of:

• A Basic Assembly (Item 1),
• A Collet (Item 2),
• Mounting Seal (Choice of Item 3 or 4).
  Specify Part Number to suit probe diameter.
  

Type	Ordering Part No.	Length of Scale
Standard	C1000-6	6 inch
	C1000-12	12 inch
	C1000-18	18 inch
	C1000-24	24 inch
	C1000-30	30 inch
	C1000-36	36 inch
Metric	C1000-25cm	25 cm
	C1000-50cm	50 cm
	C1000-75cm	75 cm
	C1000-100cm	100 cm

Collet	Ordering Part No.	Inside Diameter of Collet
	USC-SA82147-0-063	.063"
	USC-SA82147-00-093	.093"
	USC-SA82147-1-125	.125"
	USC-SA82147-7-156	.156"
	USC-SA82147-2-187	.187"
	USC-SA82147-3-250	.250"
	USC-SA82147-4-375	.375"

Pressure Seal for Flat Mounting	Ordering Part No.	Inside Diameter of Seal
	USC-SA8286-1-063	.063"
	USC-SA8286-2-093	.093"
	USC-SA8286-3-125	.125"
	USC-SA8286-4-156	.156"
	USC-SA8286-5-187	.187"
	USC-SA8286-6-250	.250"
	USC-SA8286-7-375	.375"

Combined Pressure Seal and 3/8" NPT Tapped Boss Mounting	Ordering Part No.	Inside Diameter of Seal
	USC-SA-8286-8-063	.063"
	USC-SA8286-9-093	.093"
	USC-SA8286-10-125	.125"
	USC-SA8286-11-156	.156"
	USC-SA8286-12-187	.187"
	USC-SA8286-13-250	.250"
	USC-SA8286-14-375	.375"

* DC probes require special base and pressure seal due to curvature of sensing head.
   This should be specified when ordering.