DAT:	Sensing Head Type*
187:	d = .187"  - Sensing Head Diameter (inches) **
24:	a = 24" - Overall length - inches
F:	m = 1/4" - Reinforcing tube
	D E F H J L 1/16" 3/16" 1/4" 5/16" 3/8" 1/2"
22:	b = 22" -  Reinforcement tubing length (inches) ***
CD:	e = 5/32" swaged down to 1/8" - Take-off Tube Diameter
	A C D E F 1/16" 1/8" 5/32" 3/16" 1/4"
Thermocouple Type (DAT probe only)
K:	Chromel - Alumel thermocouple
J:	Iron - Constantan
T:	Copper - Constantan
E:	Chromel - Constantan
Plug:	Plug termination is standard.  Jacks or leadwire are available. - DAT probes only

* See front page for standard sensing head type
** Give desired dimensions as decimals, e.g. .125" diameter = 125 in part number
*** Omit if reinforcement tubing is not required

VARIATIONS

United Sensor 3 Dimensional Directional Probes are flexible in design, permitting a wide choice of options to fit individual needs; e.g., longer or shorter lengths of probes and reinforcement tubing, lager diameters for reinforcement and pressure take-offs, removable thermocouple, leadwire termination, etc.

Unless otherwise specified, all 3 Dimensional models are made of corrosion resistant non-magnetic stainless steel and silver brazed.  If required, inconel can be specified.